Model: 240-12
Type: Hydraulic
Year: New
SPECIFICATIONS:
Tonnage………………. 240
Bending length………… 144”
Dist. Between Housings…. 126-1/2”
Throat Depth………….. 8”
Stroke Length…………. 8”
Ram Adjustment………… 8”
Fast Approach Speed……. 50 IPM
Fast Return Speed……… 70 IPM
Press Speed…………… 0-25 IPM
Motor Size……………. 30 HP – 220/440V – 3 Phs
Weight……………….. 33,000 Lbs
Dimensions (LxWxH)…….. 159″ x 56-1/2″ x 111″
CAPACITIES:
Mild Steel ………….. 12′ x 5/16″
………………………. 10′ x 3/8″
………………………. 8′ x 7/16″
………………………. 6′ x 1/2″
EQUIPPED WITH:
Clamp Type Back Gauge, Manually Adjustable (X, Y & Z)
(3) Speed Ram
(3) Position Foot Pedal
Manual Ram Depth Adjustment w/Digital Readout
Hour Meter
Hydraulic Oil Included
Disconnect Switch
“Fully” Hydraulic
Operation & Parts Manual
EQUIPPED WITH:
American Made Motor
Nema Electrics
Bottom Time Delay
All Steel Construction
OPTIONAL ACCESORIES:
Request Factory Start Up by Base Service Man … $750.00 per day plus expenses and/or prepaid airline ticket; $40/hr travel time; $60/hr training.
* Manual Front Reading Back Gauge (24”) w/Mechanical Readout
Power Front Reading Back Gauge w/5 Station NC “Go To” Controller on Pendant
Power Ram Adjustment w/5 station “Go To” Controller on Pendant
Extra Length on Back Gauge
Micrometer Precision Gauge Unit (2 Required)
CNC Ram Stop
CNC Back Gauge
* 24” Support Arms “Slide” Type
Extended Support Arms (each)
Disappearing Stop
* Work Light
* Variable Tonnage Control
* One Shot Lubrication
Automatic Lubrication
Oil Cooler
* Light Curtain w/Full Fence
* Operation Station Palm Control
Additional Foot Pedal w/Key Lock
Palm Buttons/Foot Control System
Dove Tails or T-Slots
Ram Machining
Bed Machining Angle Brackets
Angle Brackets (Plates) for Top (4” x 4”)18” Shorter than Bed
Angle Brackets (Plates) for Bottom (4” x 4”) 18” Shorter than Bed
Increase Throat Gap or Increase Open Height (Based on Tonnage)
Increase Stroke Length
* Keylock Switch
Die Rollover Bars (Recommended for 4 Way Dies)
Air Lift (Recommended for 4 Way Dies)
Dual Calibration
208 Volt
Crating Charge (Not an Export Crate) Still Requires Tarping
Special Paint Colors
Bolt/Shim Kit for Leveling
ASK ABOUT OPTIONS NOT LISTED
* RECOMMENDED OPTIONS
NOTE: ALL PRICES SUBJECT TO CHANGE
COMMENTS:
Mfg. In The U.S.A.
“Hydraulic Overload” Protection Prevents Operator from Harming Brake Should Operator “Mistakenly” Attempt to Bend Thicker Material with an Improper Die Opening
DISTRIBUTION & PARTS CENTER
Need A Part ?
Have A Technical Question ?
CALL: IMCO at 614-914-5087
F.O.B.: Location
TERMS: Check w/Order
All prices subject to change without notice
